30mm - 50mm
If you love the colours of our Brighouse Buff slabs but it’s not quite contemporary enough for your project, our Greetland Sawn Paving is just the ticket. We achieve that perfectly smooth finish by diamond cutting all six sides, and thanks to its distinctive mix of natural blues, greys and buff shades the stone has real movement that’s spot on for a clean, modern look.
If your project calls for more than just slabs, you can match it easily with anything from the Brighouse Buff selection, from Steps and Risers to Copings, Paving and Pier Caps. The thickness of the slabs are cut to 30mm, 40mm or 50mm thick and 600mm wide as standard, but we can cut length and width to any bespoke dimensions, or randomise them if you want a slightly less uniform feel.
Tolerance for these particular slabs is around 1-2mm so we recommend 5-10mm joints for pointing. If you’re laying it in a high traffic area or somewhere with lots of trees or foliage, we also recommend using a natural stone sealant to protect against staining and give it a bit more grip in wet weather.
A small amount of veining is common in Greetland stone so if you would like a free sample then just add it to your basket below, but please do remember this will just be a small representation. We can also send you a full-sized slab for a small additional cost.